SurfaceFabrication.com |

16 Gauge Luxury Sink Line
IPT Sink Company offers a 16 gauge line of high end, luxury stainless steel sinks. The sinks are an undermount design to compliment the countertop surface. The line is available in a variety of configurations and styles including the zero radius and apron front/farm house design as well as many others. All products are finished in a fine brushed satin and feature sound absorbing material on the underside to eliminate sound and vibration.

DC020
DeWalt offers the DC020, a cordless/corded fluorescent worklight. The tool can be used wherever additional lighting is required to complete applications, such as dark areas, crawl spaces and basements. The worklight has a 38-watt fluorescent bulb has a low amp draw. It can be powered by AC power and all 12 to18-volt DeWalt batteries. For additional jobsite power solutions, the tool is equipped with two AC power outlets, which help to eliminate the need for additional power strips. A pivoting support arm provides increased versatility, and the compact design allows the end user to transport, store and set up the worklight. For increased durability, the worklight is designed with roll cage protection.

Faucets
Revere Sink is expanding its line of stainless steel sinks and accessories with the introduction of seven new faucets, providing a complete, customized look for each of their customers. With seven models, two different finish options and multiple price points, the new line of single lever faucets includes two pull-down models, two pull-out models with dual spray, one model with side spray, one pre-rinse model with 360-degree rotation and a bar/hospitality faucet. The new faucets are available in both chrome and brushed nickel. The solid brass construction of each faucet spout, base and handle ensures a low maintenance, easy-to-clean faucet that resists rust, discoloration and damage over time. In addition, all Revere faucets feature removable ceramic disc cartridges, which protect from debris and hard water for reliable and dependable performance.

RC-1028 V-Groove Router Bit
Amana Tool offers the RC-1028 industrial insert V-groove router bits. The design uses a high grade carbide insert knife specially designed for miter folds, sign making and lettering applications. The router bits are suitable on laminates, plywood, solid wood, aluminum and foam, plastic and foam and solid surface materials. The design includes a reversible knife, which can be rotated when one side becomes dull. Once the insert knife shows wear on both sides, it can be replaced and secured using the locking screw system, ensuring safety and cutting accuracy. The bit is available in angles ranging from 60 to 150 degrees with a ¾-in. shank and angles ranging from 45 to 160 degrees in a ½-in shank.

Seam Setter VC1
The Seam Setter VC1 is a three-in-one installation tool used for joining seams, leveling seams and stabilizing backsplashes. The product is available and engineered by Omni Cubed Inc. The product features hand-pump vacuum cups which provide full-contact hold, and if needed, the cups can be re-pumped without losing the remaining vacuum. The two leveling components slide on rails for custom placement on each side of the seam, and feature non-spinning, leveling feet with vinyl caps and is made from long-lasting anodized billet aluminum and stainless steel components. The company offers two sizes of vacuum cups for varying stone applications: 6-in. cups (recommended for natural and engineered stone) and 4.5-in. cups (recommended for solid surface).

Sinks
Apollo International Products offers 17 unique undermount sink styles from a new U.S. Distribution Center, which targets master distributors selling to fabricators and the kitchen and bath industry. The sinks are 100 percent acrylic, thermoformed products that can be hard seamed to laminate and solid surface or soft seamed to granite. The company offers large, deep bowls that slope almost straight down and the sinks offer approximately a 3/4-in. mounting lip, cut with CNC machinery to assure a flat surface. According to the company, this means mounting the sinks requires little or no prep time.

Wavy Edge Scuff & Buff Ball
Performance Abrasives offers the patent pending Wavy Edge Scuff & Buff Ball. Made with non-woven material, the ball is available in the following grits: Tan (60G), Green (180G), Maroon (320G), Grey (600G) and White (non-abrasive). The ball is made from a stack of individual wavy edge discs that are interchangeable and replaceable. Diameters available are 2, 3 and 4 in. Shaft lengths available are 2 1/2, 3 1/2 and 5 1/2 in. with a 1/4 in. diameter shaft. Shafts mount into collets or drill chucks. They will work in a bowl area or radius area to sand, finish or polish.