SurfaceFabrication.com |

Axiom Ltd. offers High-Tack, a one component adhesive with high grip based on advanced polymer technology. The adhesive is odorless, neutral and free of silicone and isocyanides. The low VOC adhesive cures with atmospheric moisture to form a durable seal. It is available in 290-mL cartridges in white; 12 cartridges per case.

CMS/Brembana's FALCON is a fully interpolated 5-axis bridge saw with a built-in Auto Robotic Manipulator (ARM), for loading, unloading and manipulation of pieces within the nested slabs. The ARM can be programmed to separate pieces and make way for the blade to complete a cross cut. It has a lifting capacity of 1000lbs. and be also able to pickup a piece as small as 2” X 24”. The FALCON also has a 30-degree Corner Blade fixed on the nose of the spindle that can cut and separate an internal corner in one motion. The FALCON has an optional Undercut Blade System (UBS) to cut the slots for steel rods at 0-degree and 90-degree angles. The FALCON can be configured as a fully automatic cutting line.

Moraware JobTracker eliminates the time fabricators and installers waste on scheduling and paperwork, according to the company. JobTracker is scheduling and job management software that uses a web browser-based interface. It can be configured to manage the variety of jobs done by fabricators and other specialty contractors.
The software features a calendar with a spreadsheet of job information and instant access to the details of any job. The multi-user system allows changes made by one person to be immediately accessible to everyone in the office, shop and field using mobile devices. Dealers, builders and other customers may also log into the system to see dates and other information about their jobs.

The Omni Cubed Pro-Cart AT1 provides a solution to the challenges associated with large and cumbersome countertop installation carts. The cart is constructed from aluminum tubing, so it is strong and lightweight at only 46 pounds. Important for climbing stairs, the cart stays attached to the countertop when lifted and the 8" casters allow resting on stair treads. Pneumatic casters dampen vibrations and enable travel across rough terrain such as gravel or lawns. The wheelbase makes the cart very stable, even with large tops, and the cart's high ground-clearance allows "popping of wheelies" over larger curbs. Tops are secured by clamps located on each side of the cutout to reduce breakage in the middle. The optional upgrade kit enables the cart to be folded for easy storage (reduces cart width to only 9 in.). All Omni Cubed products are engineered, manufactured, and assembled in the USA and are covered by a one-year manufacturer's limited warranty.

Chemcore Industries now offer the Royalty line of stainless steel sinks. The line consists of three popular kitchen styles: 50/50, 60/40 and 70/30, with reverse models available. Backed by a lifetime warranty, the sinks are constructed with 18-gauge stainless steel and feature distinguishable sizing, double thick spray sound undercoating, and double thick sound pads on all flat surfaces on the backside.

Domain Industries has introduced 11 new models to its line of Stratus stainless steel sinks. Each sink is hand-crafted from 15-gauge, certified-304 stainless steel and features bowl depths up to 11 in. and widths up to 43 in. The sinks also feature 15 mm radius corners that allow the sinks to be cleaned and maintain during daily use.

KMT Waterjet Systems offer the Streamline PRO 90,000 psi waterjet cutting pump. With speeds up to mach 4 in water pressure, the pump has capability for the fastest waterjet cutting process in the stone and tile fabrication industries. Features of the pump include: continuous production of 90,000 psi to enable efficient cutting over lower pressure systems, a threaded stud design to utilize hydraulic tension, downward compatibility to 60,000 psi operational pressure when less force is needed, software with remote access and ability to network multiple pumps, multiple language controls, and dual pressure compensator.

Designed for 100 percent water recycling and closed-loop operation, the Hy-Pack system, from Beckart Environmental, filters influent from saws, polishers and CNC equipment down to less than 1 micron, and routes the clean water back for use in the fabrication process. The fully automated systems include company-engineered PLC control panels, and fabricators deal directly with the manufacturer throughout the planning, installation and support phases of all critical equipment. All systems are backed by a factory-trained network of regional support technicians.