vertical seaming table, anyone?

[lensmith]

Anyone use a vertical seaming table, and if so, pictures please?

[hotrodjohn]

I always thought it was a good idea as I am in a small building. Just never got around to it. :roll:

[Steve Lefebvre]

I make these to order, about 4 foot moduels. They are made at the same angle as the panel saw and the saw operator rolls the deck pieces onto the seam table rollers and glues up the seam. He cuts the balance of the job while the seam is curing.
http://i19.photobucket.com/albums/b151/088scruffy/ssurface/vseam1.jpg

The shelf rollers flip down in 2 foot segments and smaller L's can be seamed above larger ones.
http://i19.photobucket.com/albums/b151/088scruffy/ssurface/vseam2.jpg

Closeup of the flip down shelf rollers.

http://i19.photobucket.com/albums/b151/088scruffy/ssurface/vseam3.jpg

[Andy Graves]

Steve,

Why doesn't anyone know you make these cool tools? I understand you are a FESTOOL dealer, but nobody knows by looking at your website. :D