3M hot melt

[Todd]

I use a 3M polygun TC and I'm running low on glue. Before I reorder I thought I'd find out what you all use and why.

I use a yellow, fast setting glue in the shop, and I like a clear, slower setting glue in the field.

Most everything I do in the shop is temporary and I like the yellow because it releases easier, in the field I want a more permanent bond and a little more open time.

I don't know the numbers of the glues I have now, the boxes are long gone and I'll have to look for the invoice.

I ordered the last batch over the net, who has the best prices?

TW

[Joe Corlett]

Todd:

I've got the same gun (I think). Do the sticks have the notches? If so, the 11LB. boxes of glue I bought were about ninty bucks.

If it's the same gun and glue, sell me a few pounds, please. I really don't want to spend ninty bucks to be able to use my gun again around the house and I keep bumming straight sticks from Dani that I have to push through with my thumb.

Thanks,

Joe

[Todd]

Joe,

You bet, stop by anytime.

Just kidding, I'll send you some when it gets here. Send me your address.

T

[BRUCE]

THE AMBER COLORED 3M STICKS MAY BE THE 3747Q, THE CLEAR 3M 3792Q. Q STANDS FOR QUADRAC (STICKS W/ RIDGES) AND DO COME STD IN 11LB CASE. THE GUN IS A TC GUN AND WITH A QUAD ADAPTER THE SAME TC GUN (WHICH SHOOTS THE TC OR 5/8 X 2 STICKS) BECOMES A QUAD. BRUCE ADHESIVES SELLS BOTH THE GUNS AND STICKS BUT A LOT OF DOLLARS CAN BE SAVED BY EITHER BUYING THE 5/8 X 2 FROM BRUCE FOR ABOUT 80.00 PER 20LB CASE OR CONVERTING FROM THE Q TO ANY 1/2" X 10" STICK APPROXIMATELY 75.00 PER 25LB CASE. WWW.BRUCEADHESIVES.COM OR 1866 MIX TIPS (649-8477)